is now finished as far as the guitar made that they can be painted this week. Latest scores and errors were asgebessert, the guitar was sanded again, cleaned and treated with sealer so the paint does not pocketed into the pores as it dries. So later, a more level paint surface is achieved.
On the lower picture you can see the holes for the pots and pickup selector switch.
The selector switch has a very short stem, so here is yet another recess was made
The other two additional wells are possibly push / pull pots, which also have the actual speed control or a switch level to double spooler to split pickups and the sound only by a reel to take to get a different sound while still nor regulate the volume to.
The selector switch has a very short stem, so here is yet another recess was made
The other two additional wells are possibly push / pull pots, which also have the actual speed control or a switch level to double spooler to split pickups and the sound only by a reel to take to get a different sound while still nor regulate the volume to.
In this picture you can see both the lower fat hole in e-trade to the pickups with volume and tone pots, as well as on the end of the jack, as even the small top hole, leading to a hole for the mounting of the bridge. Through this connection, the web, including the strings connected to ground to first optimum isolation from electrical interference from power supplies and fluorescent lights, etc. to achieve, and second to connect the guitar playing with the mass of the complete circuit (guitar-> amp-> FI-Schutzschalter/Hausstromkreis) order not to possibly faulty electrics as a sound reinforcement system to be bothered with a microphone 230.
Below you can see well to access the truss rod adjustment to the neck and, to counteract the string tension. This will later be provided with a cover.
0 comments:
Post a Comment