Pressure Point Ankle To Start Period

24.08.2008

is now finished as far as the guitar made that they can be painted this week. Latest scores and errors were asgebessert, the guitar was sanded again, cleaned and treated with sealer so the paint does not pocketed into the pores as it dries. So later, a more level paint surface is achieved.

On the lower picture you can see the holes for the pots and pickup selector switch.

The selector switch has a very short stem, so here is yet another recess was made
The other two additional wells are possibly push / pull pots, which also have the actual speed control or a switch level to double spooler to split pickups and the sound only by a reel to take to get a different sound while still nor regulate the volume to.

In this picture you can see both the lower fat hole in e-trade to the pickups with volume and tone pots, as well as on the end of the jack, as even the small top hole, leading to a hole for the mounting of the bridge. Through this connection, the web, including the strings connected to ground to first optimum isolation from electrical interference from power supplies and fluorescent lights, etc. to achieve, and second to connect the guitar playing with the mass of the complete circuit (guitar-> amp-> FI-Schutzschalter/Hausstromkreis) order not to possibly faulty electrics as a sound reinforcement system to be bothered with a microphone 230.

Below you can see well to access the truss rod adjustment to the neck and, to counteract the string tension. This will later be provided with a cover.

Unrar Burn Mount Image

19.08.2008

The last sanding before painting started:

Harold And Kumar Escape Bottemless Party

14.08.2008

The neck is closer in shape and working on the timber so slowly to the end ..

Little Lump In Neck Feel Dizzy

12.08.2008

neck and body are married.



The head roughly in the form

schonmal and provided with holes for the tuning pins.



after 48 h was then fitted with a strain of neck and fingerboard glued:

How To Masterbate Audio Online

11.08.2008

The effects pedal is now finished, sounds hammer-like well and is then in the beautiful, still empty housing soon on the way to its new owner.

Problems At Jamba Juice

08.08.2008

Here again put together a picture of all the previously produced parts. Neck and body are not yet glued the fretboard and also just upped the ante. This time only a cell phone picture, but whatever.
Next, milled into the neck under the fingerboard to the channel for the truss rod that adjusts the neck curvature, caused by the stress of the strings, which move with about 70 kilogram force on the headstock.
Without this is not a sensible string height adjustable and the neck would turn slowly krum.

How To Ease Rib Pain From Excessive Coughing?

05.08.2008

The Fuzzhead is now also the first time assembled and does not work as expected.

Here are some new pictures:

the head plate is characterized, cut and glued with a polyurethane adhesive, not glued, as you might assume. This Adhesive foam up and crawls into the smallest pores and hardens even harder than normal bone glue used in guitar from. The glue spots behind stable than the wood itself These are then re-ground invisible to ensure the 'perfect' finish.








Furthermore, it was appropriate for the binding with acetone. Acetone dissolves in the plastic and then the Binding applied directly to the body.

Mens Waxing, St Louis

30.07.2008

The thickness of the mahogany is 40mm and the maple top is not quite on the edge again 8-9mm, so on the whole Les Paul Standard thickness .. Similarly
is the fretboard in standard Gibson mass, just like the original.

Here again some photos:

(missing the final round) E-trade in multiple rounds








Similarly, the PU-milling (again, missing the final touch höhö)













you fit in a LP case, that is good to know, because I wanted to bring along for the trip one to pick.







Here schonmal a taste on a small project on my part for the builder.
course just enough money for materials and to pay for some tools, so I thought I would build him a very good overdrive. The
Fuzzhead by Robert Keeley. http://www.robertkeeley.com/product.php?id=25
(As far as I know, I am the first one from simulating the.
So as a rebuilt his GP debut, is also my Fuzzhead one ...)











worked Labeling of fuzz like this: First of a printed negative
the layout on laser printer Klarsichtfolier, then the non-light-dense bodies reworked with pen, covered the body with photoresist to create plates, then developed with developer, sealed then the rest of the casing with tape, EisenIIIChlorid set, but unfortunately with this one too hot, so I have assessed the etching time wrong and they get clean with sprinklers. Does not matter though, because even looks cool. The writing is reingeätzt deep at the deepest point of about 0.8 mm.
I'm building two: one for the tests and at the end for me, and the second optimized then clean for him, with the nicer housing.
Tonight is the first finished, I think. I think but even the whole last week ..